Ihr Partner für Extruder und mehr ...

Punching Units

Haul-offs Units

Cooling and
calibrating systems

Single Screw Extruder

Complete Extrusion line

 
Single Screw extruder for rubber and silicone
Ankele - Single Screw extruder for rubber and silicone
Cutting Unit / Servocutter ASC
With this Ankele machines ASC 20 and ASC 50 we extend our proven machine program within the range non–cutting separation from plastic / rubber profiles, tubes, optical waveguide cables etc.
Tilt tables and roller tilting tables
Ankele tilt tables can be delivered in lengths up to 6000 mm.
Single screw laboratory extruder
Single screw laboratory extruder and customer-tailored special extrusion machinery
Complete Extrusion lines
Extruders and downstream equipment enable us to offer system-solutions from a single supply source.
Cooling and calibrating systems
To complete our machine and installation programme we also design and manufacture custom-made, ready-to-instal cooling and calibrating systems.
Cutting Unit / Guillotine
A new design for our mobile cutting units (guillotine) for hard or soft profile without steel reinforcement.
Coilers
Ankele Coilers
Single screw extruder Ø 18 - 40 with flat gear
We offer an ideal range of single-screw extruders with screw diameters from 18-40 mm and ranging in output from 1,5 - 60 kg/h.
Caterpillar haul-off
Pneumatical adjusted in height and with integrated pneumatic weight balance
Drum and disk pull-off
Ankele has developed a separate series of special pull offs/haul offs for multiple requirements e.g. from cables or strippings to coated granulate. Each pull off is customer-tailored in lay-out, design and construction.
Punching unit type STE 1-80
In addition to our extrusion following program we extended our product range for a punch unit type STE 1-80 running along to punch into plastic profiles a oval or round hole with a maximum diameter of 15mm.
Single Screw extruder for fluorpolymer
This extruder machines are suitable by your special equipment and characteristic for the processing of nearly all extrudable fluoroplastics such as PFA, FEP, PVDF, Teflon etc.
Extruder unit for co-extruders or main extruders
Ankele designs and builds customer-tailored single screw extruders of the highest quality for individual installations (with or without drive units).
Assembly-Set UNF 1/2
The assembly set is used to make 1/2 "-20 UNF threaded probe bores in tools, adapters or flanges made of uncured and / or alloyed steel grades
Single screw co-extruder with flat gear
Co-extrusion is gaining increasing economic significance because multiple solutions are possible in only one production line.
Single co-extruder with new CMG-drive
As novelty we present you our Co-extruder range with cooled compact gear motor type CMG.
Transverse saws and precision saws
The saw programme includes standard and precision saws with hood.
Caterpillar belt haul-off
The "Air-Lift-System" avoids damage to the product and discharge belt, other withdrawal speeds or pull-off forces on request.
Collapsible reel
The Ankele - collapsible core collapsible reel allows a quick and easy change of a wound coil.
Single screw extruder Ø 45 - 120 with flat gear
This series is an excellent supplement of our ideal range of single screw extruders and is available in various capacities from 40-700 kg/h.
Special machines and devices for the extrusion application
Special machines and devices for the extrusion application by Ankele
Single screw recycling extruders
Customized recycling extruder for all thermoplastics, rubber blends, silicones and fluoroplastics
AMF - machine-stands
AMF - machine-stands are standard build in steel St 37 solid, galvanize with blue chromatin. All machine-stands inclusive adjusting nut complete assembled.
Extruder by Ankele Kunstoffmaschinenbau
Ankele extruders and co-extruders with CMG or flat gearing, for fluoroplastics, rubber and silicone extruders, recycling extruder, laboratory special extruder
Extruder von Ankele Kunstoffmaschinenbau
Extruder Einschneckenextruder Extrusionsanlagen Maschinenfüße Verfahrenseinheiten Kunststoffmaschinen Herstellung und Vertrieb
Single screw extruder Ø 30 - 120 with CMG-Drive
Specifically, we present you with proven high-grade quality standard, our range of machines for main- and co-extruder with chilled AC compact gear motor type: CMG
 
 
Single Screw extruder for rubber and silicone
Single Screw extruder for rubber and silicone
Ankele - Single Screw extruder for rubber and silicone
1
Cutting Unit / Servocutter ASC
Cutting Unit / Servocutter ASC
With this Ankele machines ASC 20 and ASC 50 we extend our proven machine program within the range non–cutting separation from plastic / rubber profiles, tubes, optical waveguide cables etc.
2
Tilt tables and roller tilting tables
Tilt tables and roller tilting tables
Ankele tilt tables can be delivered in lengths up to 6000 mm.
3
Single screw laboratory extruder
Single screw laboratory extruder
Single screw laboratory extruder and customer-tailored special extrusion machinery
4
Complete Extrusion lines
Complete Extrusion lines
Extruders and downstream equipment enable us to offer system-solutions from a single supply source.
5
Cooling and calibrating systems
Cooling and calibrating systems
To complete our machine and installation programme we also design and manufacture custom-made, ready-to-instal cooling and calibrating systems.
6
Cutting Unit / Guillotine
Cutting Unit / Guillotine
A new design for our mobile cutting units (guillotine) for hard or soft profile without steel reinforcement.
7
Coilers
Coilers
Ankele Coilers
8
Single screw extruder Ø 18 - 40 with flat gear
Single screw extruder Ø 18 - 40 with flat gear
We offer an ideal range of single-screw extruders with screw diameters from 18-40 mm and ranging in output from 1,5 - 60 kg/h.
9
Caterpillar haul-off
Caterpillar haul-off
Pneumatical adjusted in height and with integrated pneumatic weight balance
10
Drum and disk pull-off
Drum and disk pull-off
Ankele has developed a separate series of special pull offs/haul offs for multiple requirements e.g. from cables or strippings to coated granulate. Each pull off is customer-tailored in lay-out, design and construction.
11
Punching unit type STE 1-80
Punching unit type STE 1-80
In addition to our extrusion following program we extended our product range for a punch unit type STE 1-80 running along to punch into plastic profiles a oval or round hole with a maximum diameter of 15mm.
12
Single Screw extruder for fluorpolymer
Single Screw extruder for fluorpolymer
This extruder machines are suitable by your special equipment and characteristic for the processing of nearly all extrudable fluoroplastics such as PFA, FEP, PVDF, Teflon etc.
13
Extruder unit for co-extruders or main extruders
Extruder unit for co-extruders or main extruders
Ankele designs and builds customer-tailored single screw extruders of the highest quality for individual installations (with or without drive units).
14
Assembly-Set UNF 1/2
Assembly-Set UNF 1/2
The assembly set is used to make 1/2 "-20 UNF threaded probe bores in tools, adapters or flanges made of uncured and / or alloyed steel grades
15
Single screw co-extruder with flat gear
Single screw co-extruder with flat gear
Co-extrusion is gaining increasing economic significance because multiple solutions are possible in only one production line.
16
Single co-extruder with new CMG-drive
Single co-extruder with new CMG-drive
As novelty we present you our Co-extruder range with cooled compact gear motor type CMG.
17
Transverse saws and precision saws
Transverse saws and precision saws
The saw programme includes standard and precision saws with hood.
18
Caterpillar belt haul-off
Caterpillar belt haul-off
The "Air-Lift-System" avoids damage to the product and discharge belt, other withdrawal speeds or pull-off forces on request.
19
Collapsible reel
Collapsible reel
The Ankele - collapsible core collapsible reel allows a quick and easy change of a wound coil.
20
Single screw extruder Ø 45 - 120 with flat gear
Single screw extruder Ø 45 - 120 with flat gear
This series is an excellent supplement of our ideal range of single screw extruders and is available in various capacities from 40-700 kg/h.
21
Special machines and devices for the extrusion application
Special machines and devices for the extrusion application
Special machines and devices for the extrusion application by Ankele
22
Single screw recycling extruders
Single screw recycling extruders
Customized recycling extruder for all thermoplastics, rubber blends, silicones and fluoroplastics
23
AMF - machine-stands
AMF - machine-stands
AMF - machine-stands are standard build in steel St 37 solid, galvanize with blue chromatin. All machine-stands inclusive adjusting nut complete assembled.
24
Extruder by Ankele Kunstoffmaschinenbau
Extruder by Ankele Kunstoffmaschinenbau
Ankele extruders and co-extruders with CMG or flat gearing, for fluoroplastics, rubber and silicone extruders, recycling extruder, laboratory special extruder
25
Extruder von Ankele Kunstoffmaschinenbau
Extruder von Ankele Kunstoffmaschinenbau
Extruder Einschneckenextruder Extrusionsanlagen Maschinenfüße Verfahrenseinheiten Kunststoffmaschinen Herstellung und Vertrieb
26
Single screw extruder Ø 30 - 120 with CMG-Drive
Single screw extruder Ø 30 - 120 with CMG-Drive
Specifically, we present you with proven high-grade quality standard, our range of machines for main- and co-extruder with chilled AC compact gear motor type: CMG
27

Copryright: Ankele Kunststoffmaschinenbau, Maulbronn

 

Copryright: Ankele Kunststoffmaschinenbau, Maulbronn